Not only does this driver look as good as it sounds, it is also able to take a ton of power! Up to 120 watts of power handling are on tap with a 12 dB/octave crossover at 6,000 Hz to keep up with the most demanding professional audio, high output home audio, and high SPL car audio systems. A capacitor is included for protection from damaging frequencies at high power. Mounting hardware included.
Add detail to any speaker with PRV Audio’s TW450Ti-Nd-4 titanium bullet super tweeter!
- 1″ Bullet Super Tweeter
- Nominal Impedance: 4O
- Titanium diaphragm for an accurate and detailed response
- Screw fittings make rear mounting easy and simple
- 2 Mounting options (3 Rings supplied)
- Voice Coil Diameter: 1″
GENERAL SPECIFICATIONS
| Nominal impedance | 4 Ohms |
| Rated AES Power Handling (RMS) | 60 Watts |
| Program Power | 120 Watts |
| Sensitivity 2.00V at 1m | 107 dB |
| Recommended Hi Pass Crossover** **For Full Power Handling | 6000 Hz** **12db Per Octave Crossover |
| Frequency Response at -10dB | 4,500 – 20,000 Hz |
| Voice Coil Diameter | 1.0" (25.4 mm) |
| Voice Coil Wire | Aluminum |
| Voice Coil Former Material | Kapton |
| Diaphragm Material | Titanium |
| Flux Density | 1.45 T |
| Magnet Material | Neodymium |
EXTRA INFO
| Overall Depth | 2.68" (68 mm) |
| Mounting Depth | 1.57" (40 mm) |
| Overall Diameter | 3.03" (77 mm) |
| Cutout Diameter | 1.69" (43 mm) |
| Net Weight | 1.25 lbs (0.57 kg) |
| Shipping Weight | 1.37 lbs (0.62 kg) |
| Carton Dimensions W x L x H | 3.35" x 3.35" x 3.57" (85 x 85 x 91 mm) |
