PRV Audio D230Ti-S

The D230Ti-S compression driver is known for excellent driver performance, reliability, and power handling as replacement and upgrade for many PA speakers that use a standard 1-3/8″-18 TPI horn.

The voice coil is a copper clad aluminum wire wound on a Kapton high temperature coil former. The one-piece titanium diaphragm reduces the amount of moving mass, extending the high frequency response of the driver.

Highlights

• Throat Diameter: 1″
• Type: Screw-On
• Nominal Impedance: 8 Ohms
• Rated AES Power Handling (RMS): 30 Watts
• Program Power: 60 Watts

This driver is also available in both bolt-on and screw-on models (D230T-B / D230Ti-S). The D230Ti-B is a lightweight driver that weighs just 2lbs, and yet offers you outstanding response through 20kHz. The pure titanium diaphragm is supported by a Kapton former results in a light weight, yet durable design and offers a more natural sound for high SPL applications.

The D230Ti-S is designed to ensure a quality sound and long lasting play in your large environment applications and replacing your old drivers is easy with the standard 1" screw-on design

GENERAL SPECIFICATIONS

Exit Throat Diameter	1" (25.4mm)
Nominal impedance	8 Ohms
Rated AES Power Handling (RMS)	30 Watts
Program Power	60 Watts
Sensitivity 2.83V at 1m	105 dB
Recommended Hi Pass Crossover** **For Full Power Handling	2000 Hz** **12db Per Octave Crossover
Frequency Response at -10dB	1,800 – 20,000 Hz
Voice Coil Diameter	1.4″ (35.5 mm)
Voice Coil Wire	Copper
Voice Coil Former Material	Kapton
Diaphragm Material	Titanium
Flux Density	1.65 T
Magnet Material	Ferrite

 

EXTRA INFO

Overall Diameter	3.54" (90 mm)
Overall Depth	2.40" (61 mm)
Mounting Thread	1 3/8" 18 TPI
Net Weight	2.05 lbs (0.93 kg)
Shipping Weight	2.14 lbs (0.97 kg)
Carton Dimensions W x L x H	3.74" x 3.74" x 2.95" (95 x 95 x 75 mm)