PRV Audio 8MB700FT-NDY (Single Unit)
- Regular price
- $159.91
- Regular price
-
- Sale price
- $159.91
- Unit price
- per
Vendor : PRV Audio
Couldn't load pickup availability
PRV Audio’s 8MB700FT-NDY Forte Series was specially tailored to give you more power handling and less distortion. The larger voice coil ensures high heat dissipation and the necessary Bl to deliver high sensitivity even on high power with the minimum distortion.
The lower Qts allows more precise mid bass. Superior fidelity is achieved through a perfect combination of a non-pressed cone with a smooth frequency response and a surround ring specially designed to allow high displacement without increasing the distortion.
Highlights
- Nominal Impedance: 8 Ohms
- Rated AES Power Handling (RMS): 350 Watts
- Program Power: 700 Watts
- Sensitivity (1W/1m): 98 dB
- Voice Coil Diameter: 2.5″ (51 mm)
To get superior fidelity, the special composite cone is built with non-pressed paper for reduced break-up, delivering a smooth frequency response and a low moving mass, increasing the efficiency of the speaker.
The 8MB700FT-NDY is an extremely efficient 8″ mid bass from PRV Audio. This driver is perfect for mating to compression drivers due to its wide frequency bandwidth and its high 98 dB sensitivity rating, on 3 way system (with a suggested 95 Hz, 12 dB/octave high pass filter in place)!
Its powerful optimized neodymium motor is vented to provide excellent cooling.
The large 2.5″ voice coil allows for the high 350-watts power handling, and warrants the outstanding cooling system implemented into the motor.
High sensitivity rating of 98 dB 1W/1M which makes it capable of generating a lot of output!
GENERAL SPECIFICATIONS
| Nominal Diameter | 8″ (203 mm) |
| Nominal impedance | 8 Ohms |
| Rated AES Power Handling (RMS) | 350 Watts |
| Program Power | 700 Watts |
| Sensitivity 2.83V at 1m | 98 dB |
| Recommended Hi Pass Crossover** **For Full Power Handling | 95 Hz** **12db Per Octave Crossover |
| Frequency Response at -10dB | 70 – 5,600 Hz |
| Voice Coil Diameter | 2.5″ (63 mm) |
| Voice Coil Wire | CCAW |
| Voice Coil Winding Depth | 11.3 mm |
| Former Material | Fiber Glass |
| Magnetic Gap Depth | 8.00 mm |
| Frame Material | Die Cast Aluminum |
THIELE-SMALL PARAMETERS
| Equivalent Volume | Vas | 18.79 l |
| Excursion (mathematical)*** | Xmax | 3.65 mm |
| Free Air Resonance | Fs | 69.97 Hz |
| Mechanical Factor | Qms | 2.78 |
| Electrical Factor | Qes | 0.33 |
| Total Factor | Qts | 0.30 |
| Cone Area | Sd | 249 cm² |
| Mechanical Mass | Mms | 23.79 g |
| Bl Factor | Bl | 12.78 Tm |
| Dc Resistance | Re | 5.2 Ohms |
| Inductance | Le | 0.34 mH at 1 kHz |
| Mechanical Mass Without Air | Mmd | 21.57 g |
| Mechanical Compliance | Cms | 0.217 mm/N |
***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4
EXTRA INFO
| Overall Diameter | 8.20” (208.5 mm) |
| Front Mount Baffle Cutout | 7.30” (185.5 mm) |
| Mounting Depth | 3.66” (93 mm) |
| Overall Depth | 4.00” (101.5 mm) |
| Net Weight | 4.32 Lbs (1.96 kg) |
| Shipping Weight | 5.51 Lbs (2.50 kg) |
| Carton Dimensions W x L x H | 9.05” x 9.05” x 5.11” (230 x 230 x 130 mm) |
Shipping
Shipping charges for Ratchet's Den are as follows::
$0.00–$25.00 = $4.95 USD
$25.00–$75.00 = $9.95 USD
$75.00–$100.00 = $14.99 USD
$101.00 and up = $19.99 USD
Returning Goods
You are responsible for the cost and risk of returning item to us. You should send items to the following address:
13978 SW 139th Ct Miami Florida, 33186 USA
We cannot be held responsible for Goods damaged or lost in return shipment. Therefore, We recommend an insured and trackable mail service. We are unable to issue a refund without actual receipt of the Goods or proof of received return delivery.
Contact Us
If you have any questions about shipping and/or returns, please contact us:
- By email: info@ratchetsden.com
