PRV Audio 6MR200A-4
- Regular price
- $37.39
- Regular price
-
- Sale price
- $37.39
- Unit price
- per
Vendor : PRV Audio
Couldn't load pickup availability
The 6MR200A-4 mid range speaker is our solution for PROAudioOnWheels® for Car audio systems. This unit was designed with the goal of producing the highest possible output from a compact design without sacrificing performance, with only 2.24″ mounting depth. To ensure absolute signal fidelity, a cloth sealed surround is combined with a carefully crafted Kevlar-loaded paper cone. Additionally, a vented pole piece allows heat to escape for reduced power compression.
- Impressive choice for high output home, car, and professional audio systems
- Smooth response through the mid-bass and vocal range
- Rigid yet lightweight stamped steel frame
Use this midrange in professional 3-way sound system, as a high output car audio door speaker, or as a midrange in a bass guitar speaker. With a naturally damped paper cone and cloth accordion surround resonances are kept under control making for an easy transition to a high frequency driver.
Highlights
- Nominal Impedance: 4 Ohms
- Rated AES Power Handling (RMS): 100 Watts
- Program Power: 200 Watts
- Sensitivity (1W/1m): 94 dB
- Voice Coil Diameter: 1.5″
GENERAL SPECIFICATIONS
Nominal Diameter | 6″ (152 mm) |
Nominal impedance | 4 Ohms |
Rated AES Power Handling (RMS) | 100 Watts |
Program Power | 200 Watts |
Sensitivity 2.00V at 1m | 94 dB |
Recommended Hi Pass Crossover* *For Full Power Handling |
150 Hz** **12db Per Octave Crossover |
Frequency Response at -10dB | 155 – 11,000 Hz |
Voice Coil Diameter | 1.5″ (38 mm) |
Voice Coil Wire | Copper |
Voice Coil Winding Depth | 8.0 mm |
Former Material | Kapton |
Magnetic Gap Depth | 5.5 mm |
Frame Material | Stamped Steel |

THIELE-SMALL PARAMETERS
Equivalent Volume | Vas | 3.16 l |
Excursion (mathematical)*** | Xmax | 2.62 mm |
Free Air Resonance | Fs | 114.1 Hz |
Mechanical Factor | Qms | 13.16 |
Electrical Factor | Qes | 1.28 |
Total Factor | Qts | 1.17 |
Cone Area | Sd | 137 cm² |
Mechanical Mass | Mms | 10.1 g |
Bl Factor | Bl | 6.27 Tm |
Dc Resistance | Re | 3.4 Ohms |
Inductance | Le | 0.26 mH at 1 kHz |
Mechanical Mass Without Air | Mmd | 9.02 g |
Mechanical Compliance | Cms | 0.120 mm/N |
***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4

EXTRA INFO
Overall Diameter | 6.59″ (167.5 mm) |
Front Mount Baffle Cutout | 5.69″ (144.5 mm) |
Mounting Depth | 2.24″ (57 mm) |
Overall Depth | 2.5″ 63.5 mm) |
Net Weight | 3.52 Lbs (1.60 kg) |
Shipping Weight | 3.79 Lbs (1.75 kg) |
Carton Dimensions W x L x H | 7.40″ x 7.48″ x 4.45″ (188 x 190 x 113 mm) |

Shipping
Shipping charges for Ratchet's Den orders are based on the order total:
- Orders under $100: Free shipping
- Orders $100 or more: Flat-rate $25.00
Returning items
You are responsible for the cost and risk of returning item to us. You should send items to the following address:
13978 SW 139th Ct Miami Florida, 33186 USA
Contact Us
If you have any questions about shipping and/or returns, please contact us:
- By email: info@ratchetsden.com
Customers also like
-
Dirty Air Rocker Switch - 2013-Down Fairing Mount
- Regular price
- $29.99
- Regular price
-
- Sale price
- $29.99
- Unit price
- per
Rocker switch to fit 2013-down fairings. Momentary, perfect for air ride. One switch controls up and down for either front or rear air. Made by Evil Iron Customs. 6-wire version for MRI Ele... -
Dirty Air Front OR Rear Wiring Kit
- Regular price
- $29.99
- Regular price
-
- Sale price
- $29.99
- Unit price
- per
Rear (or front) wiring kit. Includes relay with harness, toggle switch with waterproof boot, marine grade heat shrink tubing and zip ties. Fused wire with 20A fuse included. -
Dirty Air Dump Flow Control / Muffler Fitting
- Regular price
- $6.99
- Regular price
-
- Sale price
- $6.99
- Unit price
- per
Install in the exhaust port of your valve unit or dump valve to help silence the air when released from the system, or to slow it down. Includes (1) flow control muffler
-
CUSTOM DYNAMICS H4 LED HEADLAMP ADAPTER FOR 2014-2023 HARLEY-DAVIDSON® TOURING MOTORCYCLES
- Regular price
- $19.95
- Regular price
-
- Sale price
- $19.95
- Unit price
- per
N-LINE HEADLAMP ADAPTER FOR PLUG & PLAY INSTALLATION Most 2014-2023 Harley-Davidson® Touring motorcycles come equipped from the factory with a dual halogen "Rushmore" headlamp or LED Daymaker™... -
7" Headwinds Headlamp with LED Turn Signals
- Regular price
- $188.06
- Regular price
-
$208.95 - Sale price
- $188.06
- Unit price
- per
Snake Eye LED headlamp w/amber LED turn signals & running lights Includes control module that allows run/turn function) 17 LED bulbs per side Not equipped with aiming dots Included Items: (1)... -
Custom Dynamics 4.5" Passing Lamps with Halo
- Regular price
- $189.95
- Regular price
-
- Sale price
- $189.95
- Unit price
- per
Features Feature a smooth built in white halo with advanced optical D lenses for a smooth, bright white beam pattern and superior field of vision Smooth built-in white Halos 6000K color temperatur...
-
Carlini Design Gangster Ape 1.25" 20" Stepped Black Throttle by Wire
- Regular price
- Call for price: 786-713-0378
- Regular price
-
- Sale price
- $500.00
- Unit price
- per
Gangster Ape 1.25″ features innovative forward-tilting style for the pushed forward look. Throttle By Wire bars will work on a bike with a cable or electronic throttle. – Thickness: 1.25″ in. – Wid... -
Carlini Design Gangster Ape 1.25" 20" Stepped Chrome Throttle by Wire
- Regular price
- Call for price: 786-713-0378
- Regular price
-
- Sale price
- $500.00
- Unit price
- per
Gangster Ape 1.25″ features innovative forward-tilting style for the pushed forward look. Throttle By Wire bars will work on a bike with a cable or electronic throttle. – Thickness: 1.25″ in. – Wid... -
Carlini Design Gangster Ape 1.50" 20" Black Throttle by Wire
- Regular price
- Call for price: 786-713-0378
- Regular price
-
- Sale price
- $500.00
- Unit price
- per
Gangster forward tilting for the pushed forward style. Throttle By Wire bars will work on a bike with a cable or electronic throttle. This 1.5″ bar WILL work with a factory hydraulic clutch. – Thic...