DB Drive Euphoria EXW10NCF 10" NEO Carbon Fiber Woofer
Vendor : DB Drive
Couldn't load pickup availability
- 10″ NEO Carbon Fiber Woofer
- 2″ Voice Coil
- Die-Cast Aluminum Basket with Radial Venting
- Large Gauge Compression Terminals
- Rubber Surround
- Carbon Fiber Cone
- Neodymium Magnet
- Weather Resistant Cone and Surround
- PVC Gasket
- Dual 4Ω 4 Layer Voice Coil
PHYSICAL STRUCTURE
| Outside Diameter (A) | 10.98″ (278.98mm) |
| Cutout Diameter (B) | 9.16″ (232.86mm) |
| Mounting Depth (C) | 6.25″ (159.30mm) |
| GENERAL SPECIFICATIONS | |
|---|---|
| Structure | 10″ (25.4cm) Woofer |
| Dynamic Power Handling | 2500 Watts |
| Nominal Power Handling | 1250 Watts |
| Impedance | Dual 3.6Ω Voice Coil |
RECOMMENDED ENCLOSURES
| Woofer Cut-out | 9.16″ (232.861mm) |
| Mounting Depth | 6.25″ (159.30mm) |
| Sealed Box | 0.70 ft3 (19.82L) |
| Vented Box | 0.96 ft3 (27.18L) |
| Vent Area | 10 in2 (64.51 cm2) |
| Vent Length | 24″ (61cm) |
| Tuning | 35Hz |
| Dynamic Power | 2500 Watts |
| Nominal Power | 1250 Watts |
WIRING CONFIGURATION
You can change the wiring configuration of your speakers (Series, Parallel and Series / Parallel) to match the impedance loads that maximizes the power output of you amplifier. Wiring the same woofer or multiple woofers in these three different wiring configurations will result in different impedance loads.
Series: Is the method of wiring of alternate positive with negative terminals (string method) (Illustration below)
Parallel:Is the method of wiring where you wire match 2 speaker terminals with positive to positive terminal and negative to negative. (Illustration below)
Series/Parallel: This configuration is a combination of both series and parallel. We recommend series for the terminal and parallel for the leads to amp. (Illustration below).
2 OHM DVC CONFIGURATION
Shipping
Shipping charges for Ratchet's Den are as follows::
$0.00–$25.00 = $4.95 USD
$25.00–$75.00 = $9.95 USD
$75.00–$100.00 = $14.99 USD
$101.00 and up = $19.99 USD
Returning Goods
You are responsible for the cost and risk of returning item to us. You should send items to the following address:
13978 SW 139th Ct Miami Florida, 33186 USA
We cannot be held responsible for Goods damaged or lost in return shipment. Therefore, We recommend an insured and trackable mail service. We are unable to issue a refund without actual receipt of the Goods or proof of received return delivery.
Contact Us
If you have any questions about shipping and/or returns, please contact us:
- By email: info@ratchetsden.com
